Worldwide Parts Source LLC 

 

Worldwide Parts Source LLC 
Your source for hard to find engine parts.

Engine Gasket Sets   
Engine ReRing Kits    
Engine Overhaul Kits >
Oversized Piston and Rings Sets available for some engines.

Mitsubishi Diesel      
                  
Nissan Diesel                
        
Fiat Iveco FPT & CNH Diesel    

Mazda Industrial Gas and Diesel  
         
Kia Industrial Gas and Diesel

Westerbeke Marine Engine Parts

Generac Diesel

Limited parts stock for:  
Perkins  4.154    4.182    4.135   204.24    204.30    4.25    4.30   804C  804D
Cat  3044  3044C  3044CT  C3.4  C3.4T  3046
Oversize pistons available for some engines.

____________________________________________________________________________________________________________________________________________
            
Contact Form
You can use this form to request a parts quote, request a shipping quote or request status of a previous order. 
Additional contact information:
Phone: 269 673 2313
Fax: 269 673 3125 
Website: www.WWPartsSource.com
email: parts@WWPartsSource.com 
Alternate email: wwparts@gmail.com 


Your contact name:
                                
Your Phone Number :
Your Email address ( if available ) :
Your Request information:

                           


           
 
_________________________________________________________________________________________________________
Available sets and kits:  
Upper Engine Gasket and Seal Set = Head Gasket Set

Lower Engine Gasket and Seal Set with Front Crankshaft Seal and Rear Crankshaft Seal

Engine ReRing Kit
Includes: piston rings, big end connecting rod bearings, main crankshaft bearings, thrust bearings,
upper engine gasket and seal set, lower engine gasket and seal set.

Engine Overhaul Kit
Includes: pistons, cylinder liners/sleeves ( where applicable), piston rings, piston pins, piston pin retainers, big end connecting rod bearings, main crankshaft bearings, thrust bearings, cam bearings ( where applicable), piston pin/small end connecting rod bushings, ( where applicable), upper engine gasket and seal set, lower engine gasket and seal set.
.
Note: additional parts are available at your request.

____________________________________________________________________________________________________________________
Engine Details:  
( Note: this is a partial list, if you have an engine number not listed here please contact us with your information )

____________________________________________________________________________________________________________________
Mitsubishi K3C 
Three Cylinder In-Line Diesel
Piston Bore: 70 Millimeter  /  2.756 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  900 CC  /  54.96 Cubic Inch


Click here to view or download the Mitsubishi K3C Industrial Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values

 Click here to view or download the Mitsubishi K3C Marine Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values

Click here for the complete Mitsubishi K3C Engine Service Manual and Workshop Manual with Parts Information
_______________________________________________________________________________________
Mitsubishi K3D

Three Cylinder In-Line Diesel
Piston Bore: 73 Millimeter  /  2.874 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  979 CC  /  59.77 Cubic Inch

Click here to view or download the Mitsubishi K3D Industrial Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values

Click here to view or download the Mitsubishi K3D Marine Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values

Click here for the complete Mitsubishi K3D Engine Service Manual and Workshop Manual with Parts Information

______________________________________________________________________________________________________________________
Mitsubishi K3E
Three Cylinder In-Line Diesel
Piston Bore: 76 Millimeter  /  2.992 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  1061 CC  /  64.78 Cubic Inch

Click here to view or download the Mitsubishi K3E Industrial Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values

Click here to view or download the Mitsubishi K3E Marine Cylinder Head Gasket Tightening Sequence and Head Bolt Torque Values 

 Click here for the complete Mitsubishi K3E Engine Service Manual and Workshop Manual with Parts Information
 
_________________________________________________________________________________________________________________________
Mitsubishi K3F 
Three Cylinder In-Line Diesel
Piston Bore: 78 Millimeter  /  3.071 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  1118 CC  /  68.2 Cubic Inch

Click here for the Mitsubishi K3F IDI Indirect Injected Engine Service Manual and Workshop Manual with Parts Information

Click here for the Mitsubishi  K3F DI Direct Injected Engine Service Manual and Workshop Manual with Parts Information

________________________________________________________________________________________________________________________
Mitsubishi K3G 
Three Cylinder In-Line Diesel
Piston Bore: 82 Millimeter  /  3.228 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  1236 CC  /  75.4 Cubic Inch

Click here for the Mitsubishi K3G Head Gasket Installation Information with Head Bolt Torque Values, Tightening Sequence and Valve Lash Settings.

Click here for the Mitsubishi K3G Engine Service Manual and Workshop Manual with Parts Information
________________________________________________________________________________________________________________________
Mitsubishi K3H 
Three Cylinder In-Line Diesel
Piston Bore: 78 Millimeter  /  3.071 Inch 
Stroke:  90 Millimeter  /  3.543 Inch 
Displacement:  1290 CC  /  78.72 Cubic Inch
.
Click here for the Mitsubishi K3H Head Gasket Installation Information with Head Bolt Torque Values, Tightening Sequence and Valve Lash Settings.

Click here for the Mitsubishi K3H Engine Service Manual and Workshop Manual with Parts Information
__________________________________________________________________________________________________________________________
Mitsubishi K3M 
Three Cylinder In-Line Diesel
Piston Bore: 84 Millimeter  /  3.3.07 Inch 
Stroke:  90 Millimeter  /  3.543 Inch 
Displacement:  1496 CC  /  91.29 Cubic Inch

Click here for the K3M Head Gasket Installation Information with Head Bolt Torque Values, Tightening Sequence and Valve Lash Settings. 

Click here for the K3M Engine Service Manual and Workshop Manual with Parts Information

__________________________________________________________________________________________________________________________
Mitsubishi K4F 
Four Cylinder In-Line Diesel
Piston Bore: 78 Millimeter  /  3.071 Inch 
Stroke:  78 Millimeter  /  3.071 Inch 
Displacement:  1490 CC  /  1.490 Liter  /  90.9 Cubic Inch

Click here for the Mitsubishi K4F IDI Indirect Injected Engine Service Manual and Workshop Manual with Parts Information 

Click here for the Mitsubishi K4F DI Direct Injected Engine Service Manual and Workshop Manual with Parts Information
____________________________________________________________________________________________________________________
Mitsubishi 4DQ3 4DQ30
Four Cylinder In-Line Diesel 
Piston Bore: 77 Millimeter 
Stroke:  80 Millimeter   
Displacement:  1490 CC  /  1.490 Liter  /  90.9 Cubic Inch 

Click here for the Mitsubishi 4DQ3 4DQ30 Head Gasket Installation Information with Head Bolt Torque Values and Tightening Sequence.


Click here for the Mitsubishi 4DQ3 4DQ30 Engine Service Manual and Workshop Manual with Parts Information 
___________________________________________________________________________________________________________________

CNH 4.5 Liter Engine Overhaul Kits  http://www.cnh45.com/
Bore: 104MM     4.10 Inch Nominal 4.09 Inch
Stroke: 132MM    5.20 Inch Nominal 5.19 Inch
Displacement: 4.5 Liter  ( 4485 cm3 )  274 Cubic Inches 

Case New Holland Iveco 4.5 Liter Engine Overhaul Kits  http://www.cnh45.com/
Bore: 104MM     4.10 Inch Nominal 4.09 Inch
Stroke: 132MM    5.20 Inch Nominal 5.19 Inch
Displacement: 4.5 Liter  ( 4485 cm3 )  274 Cubic Inches 

Case 445 445T 445T/M2 445T/M3 Engine Overhaul Kits  http://www.cnh45.com/
Bore: 4.09 Inch
Stroke: 5.19 Inch
Displacement: 274 Cubic Inches 

Komatsu 4D104 S4D104 SA4D104 SAA4D104 Engine Overhaul Kits   http://www.cnh45.com/
Iveco / Italy
Displacement: 4.485 cm3   4.5 Liter 
Bore and Stroke: 104 x 132 mm
Number of Cylinders: 4
Tipo : motore diesel, 4 tempi, cilindri in linea
Cilindrata totale : 4.485 cm3  4.5 litri
Alesaggio per corsa : 104 x 132 mm

Perkins 4.154 ( Pre 200 Series ) Engine Overhaul Kits 
Click here for Perkins 4.154 ( Pre 200 Series ) SERVICE MANUAL for Engine Overhaul and Engine Repair 
Bore: 88.9 MM Bore  3.5 Inches     
Stroke: 101.6 MM Stroke 4.0 Inches 
Displacement: 2.5 Liter  2,523 Liters  154 Cubic Inches  153.9 Nominal Cubic Inches
Diesel Fuel 
In-Line Four Cylinder 

Click here for Perkins 4.154 ( Pre 200 Series)  Cylinder Head Gasket Installation Information - Tightening Torque and Tightening Sequence

Perkins 4.135 Engine Overhaul Kits  
Click here for Perkins 4.135 SERVICE MANUAL for Engine Overhaul and Engine Repair 
Bore: 88.9 MM Bore  3.5 Inches     
Stroke: 88.9 MM Stroke 3.5 Inches 
Displacement: 2.2 Liter  2,209 Liters  135 Cubic Inches
Diesel Fuel 
In-Line Four Cylinder 
Click here for Perkins 4.135 Cylinder Head Gasket Installation Information - Tightening Torque and Tightening Sequence

Perkins 4.154 200 Series Engine Overhaul Kits   
Click here for Perkins 4.154 200 Series SERVICE MANUAL for Engine Overhaul and Engine Repair   
Bore: 88.9 MM Bore  3.5 Inches     
Stroke: 101.6 MM Stroke 4.0 Inches 
Displacement: 2.5 Liter  2,523 Liters  154 Cubic Inches
Diesel Fuel 
In-Line Four Cylinder 
Click here for Perkins 4.154 200 Series Cylinder Head Gasket Installation Information - Tightening Torque and Tightening Sequence

Perkins 4.182 Engine Overhaul Kits 
Click here for Perkins 4.182 SERVICE MANUAL for Engine Overhaul and Engine Repair 
Bore: 95.0 MM Bore  3.74 Inches     
Stroke: 105.00 MM Stroke 4.13 Inches 
Displacement: 3.0 Liter  2.977 Liters  182 Cubic Inches
Diesel Fuel 
In-Line Four Cylinder 
Click here for Perkins 4.182 Cylinder Head Gasket Installation Information - Tightening Torque and Tightening Sequence 
.
Engine Parts for Generac Generators
To request a parts quote use the contact form on this page or send us an email at : parts@WWPartsSource.com 
Generac 1.0 Liter Diesel
Generac 1.3 Liter Diesel 
Generac 2.2 Liter Diesel
Generac 2.4 Liter Diesel
Generac 2.6 Liter Diesel
Generac 3.0 Liter Diesel 
Generac 3.3 Liter Diesel
Generac 3.9 Liter Diesel
Generac 4.0 Liter Diesel 
Generac 4.5 Liter Diesel
Generac 5.0 Liter Diesel 
Generac 6.4 Liter Diesel
Generac 6.7 Liter Diesel 
Generac 7.5 Liter Diesel 
.
Engine Parts for Westerbeke Generators and Westerbeke Propulsion Engines 
To request a parts quote use the contact form on this page or send us an email at : parts@WWPartsSource.com 
.
Your source for Complete Engine Gasket and Seal Sets, Engine ReRing Kits and Engine Overhaul Kits
for hard to find, import, and obsolete diesel engines. 
.
Complete Engine Gasket and Seal Sets,
Includes: 
Head Gaskets,
Valve Cover Gaskets,
Valve Cover Seals, 
Front Cover Gaskets,
Oil Pan Gaskets,
Intake Manifold Gaskets,
Exhaust Manifold Gaskets, 
Water Pump Gaskets, 
Head Cover Gaskets, 
Block Cover Gaskets, 
Rear Housing Gaskets, 
Injector Seals,
Valve Seals, 
Thermostat Cover Gaskets
Oil Line Gaskets,
Oil Pump Gaskets,
Front Crankshaft Seal,
Rear Crankshaft Seal, 
.
Engine ReRing Kits 
Includes: 
Rings ( for pistons ),
Big End Connecting Rod Bearings,
Main Crankshaft Bearings,
Thrust Bearings,
Complete Engine Gasket and Seal Set,
Front Crankshaft Seal,
Rear Crankshaft Seal,
.
Engine Overhaul Kits 
Includes: 
Pistons
Rings ( for pistons ),
Piston Pins,
Piston Pin Retainers, 
Cylinder Liners/Sleeves ( where applicable ),
Big End Connecting Rod Bearings,
Main Crankshaft Bearings, 
Thrust Bearings, 
Camshaft Bushings ( where applicable ),
Piston Pin Bushings ( where applicable ), 
Complete Engine Gasket and Seal Set,
Front Crankshaft Seals,
Rear Crankshaft Seals, 
.
To request a quote send your engine numbers and parts request list by the Contact Form on this page
or send an email to: parts@wwpartssource.com 
____________________________________________________________
 
 
 
 
 
Web Hosting Companies